Headlight Care Spray for Clear Surfaces

Yellow headlights that barely shine at night – and oncoming traffic still blinds you.

Who hasn’t experienced this: Driving at night and noticing that the road ahead looks gray and blurry – not because of your eyes, but because of the milky yellow layer on the headlight lenses. The LumaShield kit removes this oxidized layer using a spray-and-wipe method, without sanding, without removal, and without a workshop appointment. After about 15 minutes per headlight, the lenses shine like new – and the UV protection layer keeps them clear throughout the season.

Advantages

• No more hours of sanding: Other kits require three sanding paper stages – one mistake and the lens looks worse than before. With this spray, the oxidation dissolves on the first wipe with the cloth, without abrasive particles, without risk.
• No workshop, no maintenance day: Instead of handing over the car and spending Saturdays in line, you can restore both headlights right in your driveway – the kit covers a complete pair including extra product for touch-ups.
• No re-yellowing after a few weeks: The applied UV protection on a sponge basis dries evenly and prevents UV rays from degrading the lens again in summer – no aerosol overspray on the paint.

Specifications

• Restoration spray: 120 ml / 4 fl oz
• Protective sealant: 10 ml / 0.34 fl oz
• Microfiber polishing cloth: 20 cm × 20 cm
• Application sponge: Dual-density, approx. 3 cm × 1.5 cm × 7 cm
• Active ingredients: Isopropyl alcohol, propylene glycol methyl ether, fatty alcohol polyoxyethylene ether-9
• Coverage: A complete headlight pair (sedan/SUV) with reserve amount
• Compatibility: Polycarbonate lenses of nearly all modern vehicles

Instructions

1. Clean: Wash headlights with water and soap, let dry completely.
2. Restore: Evenly apply spray to the lens, wipe back and forth with the microfiber cloth until the yellow layer transfers onto the cloth, then rinse with clear water and dry.
3. Seal: Put a few drops of protective sealant on the sponge, wipe in one direction over the dry lens and let dry in air.

Pro Tip: Masking the surrounding paintwork with painter’s tape makes the process even easier – any overspray can also be simply wiped off the paint with a damp cloth.