Iron-on adhesive tape – Repair tears & hems in 10 seconds

The hem is open again – and the iron is already ready.

Pants with an open hem, jeans with a tear at the knee, the frayed jacket cuff – all end up in the repair pile that never gets smaller. SwiftPatch™ iron-on adhesive tape is a heat-activated polyamide mesh fabric that permanently bonds fabrics together: cut strips, position, press with a hot iron for about 10 seconds – done. No sewing kit, no glue, no waiting at the tailor.

Benefits

• No more open hems: The repair pile with pants, kids’ jeans, and curtains disappears because every repair is done in the time the kettle takes to boil – no needle, no thread, no previous skills needed.
• No rework after washing: The polyamide mesh melts into the fibers of both fabric layers when ironed, so the bond remains machine washable – glue flakes off, this bond does not.
• No stiff patch feeling on the skin: The mesh fabric made of polyamide and nylon fuses within the fibers instead of lying on top, so the repaired spot stays as soft and flexible as the original fabric.

Specifications

• Material: Polyamide (PA) and nylon mesh fabric
• Colors: White, Black
• Contents: 2 rolls of SwiftPatch™ iron-on adhesive tape
• Width options: 1.0 cm / 1.5 cm / 2.0 cm / 2.5 cm / 3.0 cm / 5.0 cm
• Application method: Heat activation with iron (~10 seconds)

Usage

1. Cut: Cut a strip of SwiftPatch™ slightly larger than the tear or hem – choose the appropriate width depending on the repair area.
2. Position: Place the mesh tape between the two fabric layers or slide it under the folded hem and smooth it out.
3. Iron: Glide a hot iron slowly over the spot for about 10 seconds – lift the iron, the bond is permanently sealed.

Pro tip: For very thick fabrics like denim, use the iron on the highest setting without steam and extend the 10 seconds to about 15 seconds – this way the mesh fully melts into both layers and the bond remains reliable even after frequent washing at 40 °C.