VeloCraft Wood Grinding Disc for Angle Grinder

Grinding discs clog after twenty minutes – and the project is still waiting for its first cut.

Anyone who wants to shape wood with flap discs or sandpaper knows the result: the disc clogs up, the material heats up, and after a short time you keep spinning without anything moving. The VeloCraft wood shaping disc turns a standard 125 mm angle grinder into a cutting tool that cleanly removes hardwood, pine, and bark – without clogging, without heat build-up. The perforated carbon steel teeth grip the wood, the open channels immediately eject chips, and the curved disc shape glides through curves and contours as if there were no resistance at all.

Benefits

• No more repurchasing worn sanding discs: Those who previously had to buy new flap discs every few projects can now use this carbon steel disc for bowls, chair spindles, and tree root work – one tool replaces a whole drawer full of sandpaper.
• No stopping to clear the disc: The hollow teeth immediately eject wood chips and sawdust backward, so you don’t have to stop the machine every two minutes to clean the disc – the project progresses until it’s finished.
• No shaking at the handle from snagging on branches or grain: The curved disc shape prevents the grinder from being jerked out of your hands when passing over knots – you maintain control without having to correct or catch the machine.

Specifications

• Material: Forged carbon steel with metal tooth tips
• Outer diameter: 125 mm (4.9 inches)
• Mounting diameter (bore): 22 mm (7/8 inch)
• Profile: Curved / dome-shaped surface for contour work
• Weight: 54 g (1.9 oz)
• Compatible with: DeWalt, Makita, Milwaukee, Ryobi, Bosch, Metabo, Black+Decker, and any 125 mm angle grinder with 22 mm mounting
• Available sizes: 92 mm and 125 mm outer diameter

Usage

1. Install: Slide the disc onto the 22 mm spindle of the angle grinder and tighten the nut securely by hand – the 125 mm disc fits any standard 5-inch grinder.
2. Start: Switch on the grinder and let it reach full speed before touching the wood with the disc; then guide the curved surface at a shallow angle to the grain – the teeth do the work.
3. Shape: Roll the disc through curves, edges, and hollows; chips fall away immediately, the cut stays sharp, and the form takes shape in minutes instead of hours.

Pro tip: For green or resinous wood, reduce the pressure and brush the tooth surface with a wire brush after each session – this keeps the cutting performance consistently high over many projects.