Cable Pulling Tool for Electrical Installations

The cable is stuck and won't pass through the pipe bend.

Anyone who has ever tried to feed a cable through a winding pipe knows the frustrating catching at every bend. The universal cable pulling tool made from three-layer spring steel pushes through tight curves, right-angle turns, and long pipe runs where stiff pulling aids fail. The result: cable laid, pipe pulled through, job done.

Advantages

• No more getting stuck at pipe bends: Thanks to the 360° flexibility of the spring steel, the tool moves through every angle without having to pull it out and reposition it.
• Pull multiple cables at once: The flat head with a generous opening holds several cables simultaneously, eliminating multiple runs and significantly reducing installation time.
• No worries about material breakage on long runs: The three-layer spring steel withstands high restoring forces, so you don't have to fear the tool bending or breaking before the job is done.

Specifications

• Material: Three-layer robust spring steel
• Wire diameter: 4 mm
• Available lengths: 5 m (16.4 ft) / 10 m (32.8 ft)
• Head options: Double flat head or flat head + pulley head
• Scope of delivery: 1× Universal cable pulling tool

Application

1. Prepare: Select the desired length and head variant, attach or hook the cable to the flat head.
2. Insert: Insert the tool into the pipe and push steadily—the spring steel automatically follows all bends.
3. Pull through: Grab the cable at the other end and pull it together with the tool through the pipe until fully laid.

Pro tip: For very long or heavily curved pipe runs, rotate the tool slightly while pushing—this way, the spring steel overcomes even tight 90° bends effortlessly.