Wood Milling Head Angle Grinder M14 – Set of 2

Routing wooden bowls and having to reposition repeatedly because the tool doesn't bite.

Anyone who works wood by hand knows the tedious reworking with inadequate attachments – the result remains rough, the control is lacking. This wood milling head made of hardened steel transforms any standard angle grinder or drill with an M14 mount into a precise carving tool. With a diameter of 40 mm, it works cleanly through softwood and hardwood – the result is smooth bowls, plates, and decorations straight from your own workshop.

Advantages

• No more hours of sanding: The cutting geometry of the hardened steel removes material in a controlled manner – coarse manual rework is eliminated and the workpiece is finished sooner.
• No need to buy a second device: The M14 connection fits all common angle grinders and drills already available in the workshop – no new tool needed.
• No worries about incorrect material: Hardened steel remains dimensionally and cutting stable permanently, so even after many uses you don’t need to check whether the attachment is already dull or warped.

Specifications

• Material: Hardened steel
• Diameter: 40 mm (4 cm)
• Mount: Standard M14 for angle grinders
• Compatibility: Angle grinders and drills
• Application: All wood types (softwood and hardwood)
• Scope of delivery: 2x Wood milling head, 1x Manual

Application

1. Screw-in: Screw the wood milling head onto the M14 mount of the angle grinder or drill and tighten by hand.
2. Routing: Start the tool at low speed, place the milling head flat on the wood surface, and guide evenly in the fiber direction.
3. Finishing: For smooth hollow shapes, tilt the milling head slightly and continue working in circular motions until the desired depth and shape are achieved.

Pro Tip: For hardwoods like oak or beech, a medium speed and short strokes are recommended – this keeps the surface clean and prevents unnecessary heating of the milling head.